Any advice on this padlock?

Rattle that keyboard a bit and say hi, introduce yourself or tell us why you're here. For new members this is your first port of call
Post Reply
lockpickingnoob
UKLS New Member
Posts: 2
Joined: Sat Aug 31, 2019 11:01 pm
Reputation: 0
Has thanked: 0
Been thanked: 0

Hey guys, I'm totally new to this hobby and could do with some advice.

I bought a basic £10 lock picking set off Amazon the other day to get into an indoor mortice lock (locked myself out of my home office and didn't want to break the door down); long story short I picked this old 3 lever ERA lock felt chuffed and now I'm slightly obsessed.

I have picked all of the padlocks in my house since then except this blackspur lock (see attached)

I believe it has 4 pins, and that at least one of these pins is a security pin. I think it may be a spool pin, but as I have not knowlingly dealt with any security pins before I'm not sure. There is feedback on one of the pins (near the back), however when I try to allow it to counter-rotate and work the pin up to the shear the lock still doesn't open.

I have also managed to have all 4 pins up (can hear them all click when I release tension) without opening the lock, I wonder if there is a T shaped pin also? Or if perhaps there is a 5th pin that I haven't been able to feel.

(I picked up this lingo within 24 hours, don't let that fool you into thinking I'm not a noob)

Any advice would be appreciated as this lock has been tormenting me for almost two days now!

Also having seen the post by Locknoob below I'm prepared to be roasted about my apparently extremely unoriginal username. Let the banter commence :great:
You do not have the required permissions to view the files attached to this post.
User avatar
Toni
365 Winner - 2019
365 Winner - 2019
Posts: 1763
Joined: Sat Sep 30, 2017 1:01 pm
Reputation: 3548
Has thanked: 10 times
Been thanked: 7 times

That lock looks of horrible quality and probably has a plastic core and very ill shaped standard pins. I'd be surprised if it gave any useable feedback. I think you'd be better off looking for second hand brand locks like abus. Or whatever you find. Just these cheap padlocks are horrible and no fun at all.
User avatar
Baldiloks
Advanced Team Member
Posts: 7672
Joined: Mon Nov 16, 2015 8:58 pm
Reputation: 2229
Has thanked: 8 times
Been thanked: 54 times

s_laugh s_laugh

How do :welc:

Have a read of the rules and Solomon's guide to start with.

Blackspur are a bit pants and as such can be difficult to pick as a beginner.

The pins are badly shaped and probably a little beveled at the end.

I would be surprised if it had security pins.

Once you think it is all set, try bouncing the tension a little. This should drop any overset pins.

Or as a newer picker the best advice is to put it away and leave it. It will only hinder your progress .
User avatar
Billbobaggins
VIP Member
Posts: 1474
Joined: Sat Jun 08, 2019 8:15 pm
Reputation: 623
Has thanked: 48 times
Been thanked: 38 times

Hi and wellcome to the forum, the 2nd noob in as many hours, your lock looks nice on the outside but a pain on the inside!if you are in this CONTRY, try table top sales, boot sales,etc where you can get all types of locks for very little money. Have a good look around this forum for a starter, e bay also,then take some photos of your bargins and get some interesting chat going and your on YOUR
way.
lockpickingnoob
UKLS New Member
Posts: 2
Joined: Sat Aug 31, 2019 11:01 pm
Reputation: 0
Has thanked: 0
Been thanked: 0

Great thanks for the info. Will move onto other locks, cheers
User avatar
CasperDK
VIP Member
Posts: 687
Joined: Fri Oct 26, 2018 3:59 pm
Reputation: 706
Has thanked: 3 times
Been thanked: 17 times

Can we see the key?

Single pin picking these cheap badly made locks can be a real hazzle. You can probably rake it open pretty easy.
User avatar
Lock_Noob
UKLS Team Member
Posts: 4338
Joined: Sun Jul 17, 2016 10:36 pm
Reputation: 1114
Has thanked: 1 time
Been thanked: 12 times

Yes, these are cast metal locks and are surpch poor quality, I couldn’t recommend one to learn with. Master lock might make poor security locks, but they are really consistent picks and great to learn on IMO :)
User avatar
Gordon W
VIP Member
Posts: 475
Joined: Thu Sep 21, 2017 10:43 pm
Reputation: 221
Has thanked: 0
Been thanked: 8 times

Hiya mate
Pop to Wilco and pick up a couple of padlocks and a euro cylinder..

You’ll learn fast if you’re on the forum everyday and watching a lot of YouTube vids
Locknoob and helpfullockpicker are two I would recommend if you haven’t stumbled across them already
Post Reply